We at Woodwork Boss are all about organizing your home in clever DIY ways, so this tutorial by The Kim Six Fix instantly caught our eye. A desk organizer made from a single 1×3 board and that fits pencils, notes and a phone? Could it get any more perfect?
You’re also going to receive lifetime membership access to over 150 premium woodworking videos on a wide array of woodworking topics, hosted by veteran woodworkers. Comes with easy-to-follow step by step video instructions…
A bottle carrier is a bucket like carrier used to carry beer bottles and so. Yes, the same one you must have used to carry your six-pack. Drinker or not, a bottle carrier is a useful item for everyone. It can be used to carry around or store small items around a household. And it is also very easy to build one. I have several of these lying around my house. Also known as wooden beer totes, this is one wood item you will absolutely love to make. It is also super easy to build.
Here’s how it works: Every month we release new plans drafted from our workshop. You will get lifetime access to a membership area where you can download these new plans every month. There are NO recurring fees, no expiry date.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
Pallets are a great resource for the beginning woodworker. The versatile shipping staple can be mounted and modified in countless ways to create many easy woodworking projects with an rustic flair. The expansive wheeled coffee table shown here is just one smart option. For other ideas, check out 5 to Do With…Shipping Pallets.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
This two-step stool requires a bit more measuring and construction time but is still easy to cut and put together with a jigsaw, level, and wood screws. Amp up your project with a good stain or a little paint. Get your measurements here.
We need to send the information to companies who work on behalf of CanadianWoodworking.com to provide a product or service to you. (Unless we tell you differently, these companies do not have any right to use the personally identifiable information we provide to them beyond what is necessary to assist us.);
A simple lamp kit, purchased at your local hardware big box, can turn any log or piece of reclaimed wood into a lamp, custom designed for your decor. This beauty was dipped in paint and sealed before being drilled for the hardware and topped with a shade.
Break the bank? Nope. Get our free bookcase plans – “Bookcase Plan Combo Pack.” This valuable e-book will tell you everything you need to know about building bookcases, including complete plans for 6 styles!
Want something that will fit nicely in a compact space, while maximizing storage convenience. Don’t waste any time on custom shelf design. Just download our FREE woodworking projects PDF now, and start with the ready-to-go shelf plans inside! Enjoy!
Are you constantly working in your bed with laptop? This folding lap desk is the perfect solution for modern lifestyle and makes your life tons easier! Jen from The House of Wood presented this cool idea as her contribution to the one-board challenge. The challenge was to build something out of one 1×8 board.
As the nightstand is made out of plywood, it’s also budget-friendly! The same idea could easily be applied for making something bigger, such as a coffee table. Or you can take this even further and use some other wood, such as pine. The choices are endless!
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Similarly to benches, you can never have too many chairs. These great DIY outdoor chairs are built using only 2×4’s and screws! Thanks to using just 2×4’s, the chairs look minimalistic and modern – perfect for your backyard.