This two-step stool requires a bit more measuring and construction time but is still easy to cut and put together with a jigsaw, level, and wood screws. Amp up your project with a good stain or a little paint. Get your measurements here.
You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.
Offering over 3500 full-size Woodcraft Patterns & Woodworking Project Plans! We’re celebrating our 30th year of designing unique & original wood projects that “Make Woodcrafting Fun”… Christmas Woodcraft Patterns, Halloween Wood Projects, Yard Shadow Patterns, Indoor and Outdoor Furniture Wood Plans and more! Whatever the wood project, we’ve got the shop-tested patterns and plans that will simplify your woodworking with full-size traceable patterns, step-by-step instructions, assembly diagrams, wood layouts, material lists and…..technical support! Just call (800) 946-3435 if you ever have a question on any Winfield wood project!
I have rounded up 25 projects from some of my favorite building bloggers. I’ll include a note about what tools you’ll need for each so you can easily select projects that fit with what have. Go ahead, give it a try. And I would just be thrilled if you shared a photo of what you build so we can brag it up a bit!
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Drive 2-1/2-in. screws through the uprights into the rungs. Assemble the front and back frames. Then connect them with the side crosspieces. Want even more space in the garage? Check out these DIY garage storage tips.
With this free membership you will save your hard earned money. You will receive so many different woodworking projects that you don’t need to buy a single expensive woodworking magazine or book in the future! You’ll have all you need in one place – for free.
The free woodworking plans below have everything you need to get started on your next woodworking project. Detailed diagrams, color photos, videos, step-by-step written building directions, and helpful tips will help you succeed.
P.P.S: Remember…you have my 100% Risk Free Unconditional Money-Back Guarantee. I am 110% sure you will be happier than a 5 year old on Christmas morning with your package. But if for any reason you are not, no worries. Your investment is guaranteed for a full 60 days.
Cut the back, sides, shelves and top. Align the sides and measure from the bottom 2 in., 14-3/4 in. and 27-1/2 in. to mark the bottom of the shelves. Before assembling the unit, use a jigsaw to cut a 1 x 1-in. dog ear at the bottom of the sides for a decorative touch.
As all other projects in this list, building the candle holder is easy-peasy. Just find a cedar board that you like, then mark and drill the holes. You needn’t worry about the candles fitting the holes nicely either – as the project author Kristen has stated, the candles fit very tightly in the holes.