Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
Isn’t this amazing that instead of having to throw that old furniture piece away, you can now reuse it to build something even more beautiful? If you do not like this particular idea, there are many other re-purposeful furniture items you can build from an old dresser. Just search the internet for other DIY project ideas. Here is a link to the video tutorial that explains the same procedure in a more practical manner that you can easily follow through.
Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. Cut out a backer board, detail the edges however you like, mount a few clothes pins and you are done! Beginner skill level.
Alaska Dream HouseBathroomClosetsCoastal or Beachy Style FurnitureFarmhouse Style Furniture PlansIndustrial Style Furniture PlansRustic Furniture Plansshelvesstorage and organizationBeginnerWall Projects
As all other projects in this list, building the candle holder is easy-peasy. Just find a cedar board that you like, then mark and drill the holes. You needn’t worry about the candles fitting the holes nicely either – as the project author Kristen has stated, the candles fit very tightly in the holes.
A wooden doormat makes a warm welcome, plus it offers the perfect spot for scraping mud and dirt off boots and shoes. While the bloggers at The Merry Thought used their chop saw and nail gun, this one is an easy beginner DIY project, and can completed with old-school hammer and nails, miter box, and some wood glue.
You just got to love scrap wood projects. After seeing this tutorial you’ll never want to throw away scrap wood again as you can just easily turn those wood bits into cute decorations. Similar wooden houses like these have been sold even in Etsy before, but you can bet these DIY decorations will cost you a lot less – they cost virtually nothing!
Similarly to benches, you can never have too many chairs. These great DIY outdoor chairs are built using only 2×4’s and screws! Thanks to using just 2×4’s, the chairs look minimalistic and modern – perfect for your backyard.
*Free shipping applies to the contiguous United States on orders of $49 or more. Free shipping will not be applied to purchases being shipped to U.S. Territories, APO/FPO addresses, Alaska, or Hawaii. Coupon codes cannot be combined with any other offer and are only valid on Taunton Store purchases. Coupon codes are not valid on archive bundles, gift bundles, magazine subscriptions, or prior purchases. Coupon code offers are subject to change at any time.
With “How To Start A Woodworking Business” book, you’ll learn how to turn your passion into profits. This is a step-by-step detailed guide on how to make money selling your custom woodwork and it is a great addition to this package.
All you need to do is to send us a ticket in the member area to request for the project. Do include photos as well as the relevant details. Our workshop will take about 2 months to draft up a complete plan for you. Whats more, you’ll get access to plans every month which were requested from other members! You’ll never run out of ideas or inspiration for your next project.
If you are looking for a stand-out wedding gift, this one is a nice choice. The tutorial illustrates all the necessary steps, but you still need to have some basic woodwork knowledge to be able to handle the task. Here is a link to the video tutorial to make the task easier for you.
A simple lamp kit, purchased at your local hardware big box, can turn any log or piece of reclaimed wood into a lamp, custom designed for your decor. This beauty was dipped in paint and sealed before being drilled for the hardware and topped with a shade.
FreeWoodworkingPlan.com is the original free woodworking plans and projects links database. Access this site for free 24/7. Updated daily, we are currently working with almost one thousand web sites to list their free woodworking plans for you to consider using for your next woodworking project.
All of the crazy woodworking projects we can make at the home as well. But If you want to make one furniture from above wood working projects then you should read these 20 BEGINNER’S HAND TOOLS guide. It will help you work better on wood.
Imagine how you could surprise your spouse in the weekend by bringing breakfast to bed on a serving tray made by you. This DIY serving tray may be the easiest project in this list, yet it’s also one of the most practical ones. However, this project comes with a twist…
If you submit your name through a form on our website to request information from an advertiser or third party, canadianwoodworking.com is not responsible for any marketing or other use of your name by that third party.
The first bonus is the award winning “DWG/CAD Plan Viewer”. Now you don’t have to pay for overpriced CAD software. A typical CAD software like AutoCAD 2009 will cost you a whooping $950! (Amazon.com).
Drive 2-1/2-in. screws through the uprights into the rungs. Assemble the front and back frames. Then connect them with the side crosspieces. Want even more space in the garage? Check out these DIY garage storage tips.
To build the swing, you’re going to need some wood planks, wooden beads, rope and a few other items that you probably have laying around the house already. Besides the project being so easy that all you need to do is drill a few holes, the finished swing looks great too!
If you spend a lot of time in the yard or garden during the warm weather, then this do-it-yourself birdhouse will make a great summer project. Not only will the birds love it, but as it ages the wood (western cedar) will turn a soft silver color and the copper roof will acquire a handsome green patina. The project
In this project, you will be learning to make a pallet art similar to the one you see in the image below. This is one of the simple woodworking projects. You will need to buy or collect some old wood boards, screws and other basic stuff for this project.
The wall planter is made using pre-made wooden pallets which can save you a lot of time – just go to your local craft store to find something similar or use old wooden boxes, both will do the trick. A little paint and sanding is all these need for the perfect rustic look.
Looking for a quick “mass production” gift project? These tapered wooden salt and pepper shakers make a stylish addition to any table setting, and they can be made in a jiffy in a modestly equipped woodshop. You can make just the shakers, or if you have time, add the platform that is pictured here which
Just as a bit of an aside, I’m fairly new to woodworking and I’ve been looking into some routers for cutting for these projects. I came across something interesting. The guy on this page claims to have put together a homemade CNC router for less than $300. I’m curious to know what you think about it. If you’ve never heard of it and don’t have an opinion, then no problem; I thought I’d ask anyway.
This cool tool is great for sanding those irregular shapes or cleaning up a radiused corner: stuff where you need that controlled hand/eye combination to get it just right. It’s made from a simple lamination of five 1/8” strips of white oak and has a simple wedge locking system. You don’t need any hardware, just
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
You can browse our huge selection of woodworking videos, including detailed instructional videos with woodworking furniture plans all designed to enhance your woodworking skills. New videos are added on a consistent basis!
Bring a bit of nature indoors with this simple branch-supported shelf. You’ll have to find two forked branches about 1 in. in diameter, with one relatively straight side that will sit flush to the wall. Find all of the simple how-to instructions for building this shelf here. And for lots of hints and tips on hanging shelves, check out our guide.
All free woodworking project plans contain highly detailed images and step-by-step instructions. With the including cutting lists & material lists you leave out the guess work and simply start right away with your next woodworking project!
This DIY plant table is the perfect place to prepare plants for the garden. It’s also a great spot for repotting or for isolating diseased plants. The project is about 34 inches tall – standard counter height – by 46 inches long by 15 inches wide. It supports two removable trays, each measuring 7 inches
You can never have too many benches. While benches are usually considered to be something more demanding when it comes to carpentry skills, this project proves that wrong. This affordable bench plan is feasible even for beginner woodworking enthusiasts.
Find plans inside for kitchen improvements, storage projects, outdoor living, furniture, gifts, and more! An ideal resource for woodworkers looking for a new project or wanting to spruce up their home, this book has projects that can take anywhere from a few hours to a weekend to complete.
“I just got this package a few days ago, and I’ve had a hard time putting it down. There are lots of full-color pictures, with thorough descriptions of every step in the project. These turned out to be even better than I’d hoped!
Cut the back, sides, shelves and top. Align the sides and measure from the bottom 2 in., 14-3/4 in. and 27-1/2 in. to mark the bottom of the shelves. Before assembling the unit, use a jigsaw to cut a 1 x 1-in. dog ear at the bottom of the sides for a decorative touch.