Woodworking Pages About Us Adirondack Chairs Arbors Archways BBQ-Barbeques Beds Birdfeeders Birdhouses Boats Bookcases Bridges Calculate Circle Circumference Camper Trailers Christmas Tree Ornaments Coffee Tables Computer Desks Copyright Copyright Infringement
OutdoorGirl16196 from “Instructables” brings back a classic in this DIY wooden candy dispenser. She uses jelly beans, but honestly, any candy that is similarly sized will work (I’d use Skittles, or Reese’s Pieces).
You like puzzles? You love pine? And you are in a desperate need for new flooring? Well, then here’s a project that’s meant for you! This awesome flooring is made using small triangles that create a cool geometric pattern when put together.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
The wall planter is made using pre-made wooden pallets which can save you a lot of time – just go to your local craft store to find something similar or use old wooden boxes, both will do the trick. A little paint and sanding is all these need for the perfect rustic look.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Sawbuck projects! Cut it out from scrap wood you probably have in your workshop. This is not a full size pattern, but we include it because it is a way to offer name plaques at craft shows without custom cutting on the spot! Use font letters found on your computer, there are probably over 100 styles to chose from. When someone wants a name plaque you just pick the letters and slide them into the base which is cut to length to fit the name. These also make nice alphabet toys for children!Beginner skill level.
But please let me warn you: this special launch offer will close soon and you won’t be able to get in at this price after that even if you want to. Once I start receiving more testimonials, I’m going to raise the price accordingly.
This DIY plant table is the perfect place to prepare plants for the garden. It’s also a great spot for repotting or for isolating diseased plants. The project is about 34 inches tall – standard counter height – by 46 inches long by 15 inches wide. It supports two removable trays, each measuring 7 inches
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.