This wooden wine rack brings rustic charm to the drinks table. After sawing your pieces to size, stain them and allow them to dry overnight. Construction is super easy with a little good glue and a nail gun. Impressed by the bottle opener mounted on the side? It just takes a screw or two. A full tutorial is available here.
Though slightly more complex than other projects in this list and you might need to use some more complex tools (like a table saw), building this doesn’t take much time at all, meaning you can easily build this within one weekend. Be sure to follow the plans nicely and you’ll do great!
Whether you are installing a new hardwood floor, refinishing an old one, or just keeping your existing floor looking as good as new, Minwax® has a full range of products to make and keep your floors beautiful.
SUPER HUGE Jumbo Rustic 12 Decorative by cherrytreegallery on Etsy SUPER HUGE Jumbo Rustic Decorative Clothespin in dark walnut finish – office home bathroom nursery laundry wall decor note photo holder
You get exact cutting and materials list for every project. You will be able to buy exact amounts which means you’ll stop wasting your hard earned cash on wrong wood, wrong materials or the wrong quantity.
They say the best way to get through writer’s block is to just start writing. I have heard from so many people who want to learn to use tools and try woodworking, but have yet to take that first step.
George’s friend, Tom, dropped in at the shop and spent some time talking about his knife making experiences. Tom isn’t forging blades, he’s adding handles to knife blanks that he buys. This is a great way to make a wonderful custom gift for someone, or to make high quality knives for yourself, without spending a
To build the swing, you’re going to need some wood planks, wooden beads, rope and a few other items that you probably have laying around the house already. Besides the project being so easy that all you need to do is drill a few holes, the finished swing looks great too!
The absolute hardest step is cutting the triangles which need to have 30 and 120 degree angles. Though cutting the triangles is not really tough, you do need to have patience and accuracy – it can be a bit repetitive. But hey, all for a mesmerizing result, isn’t that right?
Buying frames for artwork can really add up. Making your own frame from $5 pine board is a great, inexpensive alternative. This wooden frame comes together with wood glue and convenient wood joiners, and its tutorial includes instructions for DIYers with or without a miter saw.
Do you have an old wooden dresser at home that you are no longer using? You can now start using it again by turning it into a completely new bench. Yes, you heard it right. Here, I am going to talk about a DIY project that lets you convert your old piece of dresser into a beautiful bench that can be used anywhere in the house or in the lawn.
Clear up entryway clutter with a simple coat and hat rack that you can build in about an hour from a 6 ft. 1×4 and coat hooks. You just cut the boards to fit your space, paint them, outfit them with different kinds of hooks to suit your needs and then screw them to the wall. Check out detailed how-to instructions here.
We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.
Start by cutting the 2x2s to length according to the illustration. Then mark the position of the rungs on the uprights. Drill two 5/32-in. holes through the uprights at each crosspiece position. Drill from the outside to the inside and angle the holes inward slightly to prevent the screws from breaking out the side of the rungs.
Need a good way to archive magazines? Build these simple wood storage bins and have all of your favorites at your fingertips instead of lost in a towering pile. You can build four bins from one 2 x 4-ft. sheet of 1/4-in. plywood and two 6-ft.-long 1x4s. And cutting the wood is easy with a jigsaw or band saw.
The source above is not exactly a tutorial, but it gives you a basic idea of how the author built a Quirky Pallet Art to enhance the look of their old house. You can also find another tutorial at the link below. It shares a step by step procedure for making a wooden pallet sign. The final product is not exactly the same as the one above, but the basic idea is the same.
Here’s 50 great beginner woodworking projects that will get you comfortable with the basics of building with wood. Some of the projects below can be completed in a weekend and others in just a few hours, either way all the projects will help you create something great out of wood.
How do the best craftsmen come up with woodworking ideas, and translate those ideas into easy woodworking plans? Open up this FREE article on sketching – the basic element of all woodworking project ideas – and start seeing furniture and casework in a different light. You’ll be amazed at how simple it is to unlock your imagination.
To make this handy sofa sleeve, you’ll need clamps, a hole saw, a power drill and Kreg pocket hole kit if you’d like to use it. According to A Beautiful Mess, it’s not really necessary though if the sofa sleeve is used gently. Wood glue can replace it just as well!
Hello! Thank you! I have heard about people building their own CNC machines, and it’s really impressive what some have done. That said, I am incompetent when it comes to mechanics, so I don’t know much about it!
A wooden doormat makes a warm welcome, plus it offers the perfect spot for scraping mud and dirt off boots and shoes. While the bloggers at The Merry Thought used their chop saw and nail gun, this one is an easy beginner DIY project, and can completed with old-school hammer and nails, miter box, and some wood glue.
This clever and gorgeous iPad stand is a great last-minute gift project; you can complete it over the course of 2 to 3 days. The stand has both a high and a low setting, and to amaze the audience, the leg seems magically held in place! The secret? Small rare earth magnets. Almost everyone has
I recently built a table for my daughter. The phone call telling me she had ruined the finish by putting something hot directly on the table wasn’t good. That got me thinking about trivets. This is a great CNC project; an example of accurately cutting from two faces. This article includes step by step VCarve
P.S. That’s basically it! I’ve told you everything about my life as a woodworker and what I do. Remember that you will have always free access to my membership site. You will never be billed a penny, heck I even don’t ask for your credit card details.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.