This simple and elegant planter bench project is ideal for the porch, patio, or pool. Filled with plants and flowers, it will define a corner of the porch or patio with style. Featuring all straight cuts and modular construction, the project allows the builder to decide what combination of planter boxes and connecting benches works
When I search the internet, I found the one above that I liked the most. The great thing is that they have also provided a video tutorial along with step by step procedure to make DIY floating shelves. Check the video link and see how easy it is.
OutdoorGirl16196 from “Instructables” brings back a classic in this DIY wooden candy dispenser. She uses jelly beans, but honestly, any candy that is similarly sized will work (I’d use Skittles, or Reese’s Pieces).
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
I’ve tens of thousands of projects and designs in the database. Almost 95% of customers are able to find the plan they are looking for. Now if you have a special or a very specific type of project in mind and you cannot locate a similar design, we can create a custom plan for you.
When you have your design printed, mount it to your wood blank with a spray adhesive. I bought a cedar deck board, cut it to shorter lengths, and then ripped the rounded edges off with my tablesaw. Once the edges were jointed I glued and clamped the boards to make up the panel. Use the
Dream it, Design it, Build it! This software allows you to edit, modify or even create your own woodworking plans. It will save you hundreds of dollars on “advice” that ends up not helping you at all.
Free Magazine. Geographic Availability: U.S. Only. EHS Today informs safety, health, environmental and industrial hygiene professionals in the manufacturing, construction, and service sectors about trends, management strategies, regulatory news, and new products that help them provide safe and healthy work sites.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Whittling: This style of carving wood is perhaps one of the oldest and simplest. All you need to get started with this woodcarving style is a good quality carving knife and a piece of wood. In this technique, bits of wood are cut away from a block of wood until the design the carver has in mind, takes shape. Most of the accomplished wood carvers who use this technique, use only the carving knife for both roughing and detailing work. Typically, the design is not smoothened using a sand paper; the knife strokes are noticeably visible and those are what characterizes the final piece.
TimberLine is a monthly trade magazine for the logging, sawmill, pallet, firewood and wood processing industries. Every month, TimberLine delivers information on machinery, safety, business opportunities, plant operations, company management, new products, general news, environmental issues and more. TimberLine helps readers learn about the latest technology, generate new business ideas, save $$$ on machinery/equipment and keep up with the latest breaking industry news.
The tree slice photo hanger you see in the background is just one example of what comes in a Makers Kit – a monthly craft box that lets your kids actually build some pretty cool stuff with their hands.
Please remember, if you choose the free 150 package, you will have absolutely no risk. I don’t ask for your credit card or any other sensitive details. All I need is your name & emailadress in order to send your free package to your email inbox. That’s it!
Building a woodworker bench is not an easy task for everyone, but it is for a professional woodworker. So I am here hoping that you can manage to build a good workbench. I am also sharing here a video tutorial that explains the process of making a wood workbench from the start.
In this project, you will be learning to make a pallet art similar to the one you see the image below. This is one of the simple woodworking projects. You will need to buy or collect some old wood boards, screws and other basic stuff for this project.